Power supply connection, Technical data, Connecting socket – BECKHOFF C33xx User Manual
Page 15: Contact spacing
Installation Instructions
Power Supply Connection
The 5-pin CAGE CLAMP plug connector and mounting flange illustrated is
located on the PC housing in order to connect the power supply.
Socket at the PC housing
Technical data
Connecting socket
Number of contacts
5
Contact spacing
5 mm
Minimum conductor cross-section
1.5 mm²
Minimum conductor cross-section
(AWG)
16
Rated voltage (EN)
250 V
Rated voltage (CSA)
300 V
Current EN [A]
12 A
Current CSA [A]
15 A
Length of stripped conductor
8 to 9 mm
Supplied mains power unit The Industrial PC is either fitted with a 100-240 V, 50-60 Hz power supply
unit (standard) or with a 24 V
DC
power supply unit (with the option of an
uninterruptible power supply, UPS).
Current carrying capacity of the 100-240 V power supply
unit
Current carrying capacity
of the 100-240 V power
supply unit
Output voltages from
the 100-240 V power
supply unit
Current loading
maximum
+3.3 V
20 A
+5 V stand by
2 A
+5 V
25 A
-5 V
0.3 A
+12 V
13 A
-12 V
0.8 A
Current carrying capacity of the 24 V power supply unit
Current carrying capacity
of the 24 V power supply
unit
Output voltages from
the 24 V power supply
unit
Current loading
maximum
+5 V
25 A
-5 V
1 A
+12 V
10 A
-12 V
1.5 A
C33xx
13