BECKHOFF CB1061 - Manual (Page 36)

Chapter: Connectors Internal Connectors
page 36 Beckhoff New Automation Technology CB1061
3.4 Internal Connectors
3.4.1 USB 5-14
The USB channels 5 to 10 and 13/14 are provided via four 2x5 pin connectors (FCI 75869-301LF, mating
connector FCI 71600-610LF). The USB channels 11 and 12 are provided via a 2x10 pin connector (FCI
10075025-F01-20ALF, mating connector FCI 90311-020LF).
The USB channels 5 to 10 and 13/14 support USB2.0. Furthermore the USB channels 11 and 12 support
USB3.0.
You may note that the setting of USB keyboard or USB mouse support in the BIOS-setup is only
necessary and advisable, if the OS offers no USB-support. BIOS-setup can be changed with a USB
keyboard without enabling USB keyboard support. Running Windows with these features enabled may
lead to significant performance or functionality limitations.
Every USB interface provides up to 900 mA (500mA for USB2.0) current and is protected by an
electronically resettable fuse.
Pinout 2x5 pin connector USB x/y:
Description Name Pin Name Description
5 volt for USBx VCC 1 2 VCC 5 volt for USBy
minus channel USBx USBx# 3 4 USBy# minus channel USBy
plus channel USBx USBx 5 6 USBy plus channel USBy
ground GND 7 8 GND ground
reserved N/C 9 10 N/C reserved
Pinout USB3.0 connector for channel X:
Pin Name Description
1 VCC 5 volt for USBX
2 USBX# Minus channel USBX
3 USBX Plus channel USBX
4 GND ground
5 StdA_SSRX- SuperSpeed Receiver -
6 StdA_SSRX+ SuperSpeed Receiver +
7 GND ground
8 StdA_SSTX- SuperSpeed Transmitter -