Beisler 739-23-1 Installation Manual - Manual (Page 11)

3.8 Lubrication
Caution risk of injury!
Oil might cause allergic reactions on skin.
Avoid any contact with skin.
If skin has been in contact with oil, wash thoroughly.
CAUTION!
The handling and disposal of mineral oils are governed by statutory
regulations.
Dispose of the oil through the proper channels.
Protect the environment and ensure
that no oil is spilt.
To refill the oil tank, use only ESSO-SP-NK 10 lubricant or a similar
product of the following specification:
–
Viscosity at 40° C: 10 mm²/s
– Ignition point: 150° C
ESSO SP-NK 10 is available from all
DÜRKOPP ADLER AG agencies with the following part number:
2 litre container: 9047 000013
5 litre container: 9047 000014
Oil tank for lubrication of the sewing machine head
The sewing machine head is equipped with a central oil wick. All
bearings are lubricated from oil tank 1.
–
Fill oil tank 1 through the opening in the glass panel to the “MAX”
level mark.
2-11
1