Besa Lighting Adjustable Cable (Monorail Component) User Manual
Installation guide
INSTALLATION GUIDE
Model CBL60 Adjustable Cable Support
(For use with Besa low voltage lighting systems only)
CBL60, Rev.2 2-09
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
Ceiling
Decorative cap
1. Select standoff location and install the supplied
anchor into ceiling.
2. Secure the Decorative Cap and Threaded Adapter
to ceiling using the supplied Philips screw.
Anchor
Threaded Adapter
Philips Screw
INSTALL MOUNTING HARDWARE:
Threaded
Adapter
Cable Fitter
Aircraft Cable
Rail Adapter
Set Screw
Rail Section
SECURING THE RAIL SECTION:
3. Thread the Cable Fitter onto the Threaded Adapter.
4. Height Adjustment is to be made at the Rail Adapter,
by pushing the cable through the Cable Grip.
The cable can be pulled back, to lengthen the
cable, by compressing the Cable Grip.
Excess Cable
Cable Grip
Rail Adapter
1. To install the Rail, loosen the Set Screw on the
Rail Adapter and lift the Rail into the opening on
the Rail Adapter. Tighten the set screw securely.
2. Trim of the Excess Cable from the Rail Adapter