Besa Lighting Endcap (Monorail Component) - Manual

INSTALLATION GUIDE
Model R12-NDCAP Rail End Cap
(For use with Besa low voltage lighting systems only)
TNDCAP-SN, Rev.1 7-09
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
Rail
End Cap
Rail Section
1. Push the Rail End Cap securely onto the Rail Section.
2. If End Cap does not seat properly, then the end of the Rail may have been slightly distorted
when being cut. Carefully clean the edges with a file, then reinsert the End Cap.