Besafe iZi Up X3 - Manual (Page 6)

10 11
Removing and refitting the cover
Cleaning instructions
1-
2-
3-
• Pay attention when you remove the cover, as fitting the cover
is done in the opposite way.
• The upholstery of the seat consists of 3 separate parts.
• The cover of the seat must be washed according to the
instructions on the inside of the cover (12).
• DO NOT use any aggressive cleaning agents; these may
harm the construction material of the seat.
• Refit the cover, using the previous instructions in
reversed order.
Remove the back rest cover from the seat by open the velcro
at the back, detach the elastic loops from the fixing hooks
and pull the cover carefully from the surrounding rim of the
back rest.
Remove the head rest cover by detaching the elastic loop
from the fixing hooks and pulling the cover carefully from the
surrounding rim of the head rest.
Remove the seat cover by detaching the elastic loops from
the fixing hooks and pulling the cover carefully from the
surrounding rim of the seat.
Removing the cover
Refit the cover
Warning: potential misuse
• It is NOT ALLOWED to mount the seat in a front
passenger seat WITH AN ACTIVATED AIRBAG.
• DO NOT guide the car belt around the
reclining handles.
• DO NOT use the seat without the 3-point belt (13).
!
(13)
wash with similar colours
(12)
• This is a universal Child Restraint System. It is approved
according to regulation No. 44.04, series of amendments for
general use in vehicles fitted with 3-point car belts, approved
to UN/ECE Regulation No. 16 or other equivalent standards.
Point of sale information
Notice for FORWARD-FACING installation