Besafe iZi Sleep ISOfix User Manual

Page 2

Advertising
background image

2

3

!

!

Thank you for choosing BeSafe iZi Sleep ISOfix

Contents

Vital information

BeSafe has developed this seat with much care, to protect your

child during the first phase of her or his life.

Vital information

3

Preparing to install

4

iZi Sleep ISOfix usage

5

ISOfix installation

6

Removing iZi Sleep ISOfix

10

Warning: potential misuse

13

Important advice

14

Point of sale information

15

Guarantee

16

It is NOT ALLOWED to mount the seat in a front

passenger seat WITH AN ACTIVATED AIRBAG.

iZi Sleep ISOfix can only be installed rearward-

facing with the ISOfix anchorage in a car equipped

with ISOfix anchorage points.

iZi Sleep ISOfix is approved in group 0+, rearward-facing from

0-13 kg.

The floor support must always be used. Make sure that the

floor support is fully pushed down.

The child shall always be secured with the internal harness

belts when seated in the child seat, also by carrying and when

used in combination with a push chair.

When installed with ISOfix: Make sure the indicators are green

before you drive.

When the child weighs over 13 kg or the shoulder height

grows above the highest position of the shoulder straps, the

child must change to a group 1 seat.

DO NOT use the iZi Sleep ISOfix in sleeping position when

installed in your car.

After an accident, the seat must be replaced. Although it may

look undamaged, if you were to have another accident, the

seat may not be able to protect your child as well as it should.

It is important that you read this user manual BEFORE installing

your seat. Incorrect installation could endanger your child.

Advertising