Remote control, About the registered marks etc, Replacing the batteries – Dolby Laboratories VCZ625 User Manual

Page 4

Advertising
background image

10

VCZ625

• This product incorporates copyright protection

technology that is protected by method claims
of certain U.S. patents and other intellectual
proper ty r ights owned by Macrovision
Corporation and other rights owners. Use of this
copyr ight protection tecnology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.

Notes:

Using batteries improperly can cause them to ex-
plode. Take note of the following points:

• When replacing batteries, replace both batteries

with new ones.

• Do not short-circuit, disassemble or heat batter-

ies.

• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.

Replacing the batteries

1. Open the rear battery cover.

Rear cover

2. Insert the two supplied size AA batteries ori-

enting the plus and minus poles of the batter-
ies as shown by the

and

symbols inside

the battery compartment. Close the battery
cover.

Remote control

• Manufactured under license from Dolby Labo-

ratories.

“Dolby” and the duble-D symbol are trademarks
of Dolby Laboratories. Confidential Unpublished
Works.©1992-1997 Dolby Laboratories,Inc. All
rights reserved.

• Manufactured under license from Digital Theater

Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide
patents issued and pending.

About the registered marks etc.

Signal transmitter

Operating range
: 30˚ in all directions

Advertising