Beurer GL 50 (mg/dL) - Manual (Page 22)

22 Beurer GL50 mg/dL
Label measured value
You have the following options for labelling measured values.
Before a meal
After a meal
General label (e.g. after exercising)
Labelling measured values enables you, your GP or diabetes consultant to better monitor your blood
glucose values. For example, you can display the average values of all measurements taken before
a meal.
To label a measurement, proceed as follows:
1 The measured value can be labelled as soon as it is displayed. Once the value disappears from
the display, it can no longer be labelled.
2 Press the “–” rocker switch repeatedly.
• Pressing once, adds the label “Before a meal”.
• Pressing again, adds the label “After a meal”.
• Pressing a third time, adds the label “General label”.
• Pressing a fourth time removes the label.
3 The selected label is stored in the memory of the device when it is switched off.
5.5. Post-processing and disposal
1 Remove test strip
Remove the test strip from the device and carefully dispose of it in ac-
cordance with the applicable regulations to avoid infecting others.
2 Remove cap
Carefully remove the cap from the lancing device.