Beurer MC 3800 - Manual (Page 19)

19
Caution!
• The massage chair could damage your flooring. Place a suitable, non-slip underlay under the massage chair.
Installation location
• Install the massage chair on a sturdy and even surface.
• Before using the device for the first time, remove all obstacles in front of and behind the massage chair so that
the back rest can be lowered and the leg rest raised freely.
unpacking and assembly
The massage chair MC3800 is delivered in a cardboard box.
Caution!
Do not use sharp or pointed tools (Stanley knife) to remove the packaging.
Step 1
> Insert 2 AAA batteries in the hand switch according to the markings.
Step 2
> Open the cardboard box and hold the massage chair at the designa-
ted holding points
> Remove the chair from the cardboard box
2 persons are required for this.
> Carefully remove all the packaging material
Step 3
> Unfold the back rest to the upright position until the locking mecha-
nism audibly engages.
The back rest now stands at approx. 115°.
Step 4
UP
> Plug in the plug attached to the coil spring in
accordance with the diagram.
> Fold the seat cushion backwards against the
back rest