Beurer MPE 58 - Manual (Page 9)

9
3. Initial use
• Check to ensure that the package contains all the parts that should be included in the delivery. If any parts are
missing or damaged, contact Customer Services.
• Remove all packaging material.
• Remove the protective film from the base plate and the inside before using the device for the first time.
Warning
Keep packaging material away from children! Choking hazard.
• Place the device on a firm, level and dry surface.
Before you can begin using the UV nail dryer, you must insert the UV fluorescent tubes.
In order to do this, follow the steps below:
1. Remove the base plate.
2. Carefully insert the fluorescent tubes into the sockets.
Important
Ensure that the brass terminals are correctly inserted.
3. Insert the base plate.
4. Operation
Drying UV nail gel
1. Insert the mains plug into the socket.
2. Press the ON/OFF button to switch on the device.
3. Using the UV light button, select your desired UV light treatment time.
You can choose between three different UV light treatment times (90 second timer, 120 second timer and continu-
ous operation).
Once the set treatment time has passed, the UV light switches off automatically (except in continuous op-
eration).
4. Insert your nails varnished with UV nail gel into the opening in the device (with your nails facing upwards).
5. Switch the device off after use. To do this press the ON/OFF button and pull the mains plug out of the socket.