Beurer MPE 70 - Manual (Page 13)

13
4. Intended use
This device is intended exclusively for use on the hands, feet or elbows of humans.
Do not use the device on animals!
5. unit description
1. Paraffin bath
2. Lid
3. Green operation light
4. Temperature controller
5. Red heating light
6. Protective grille
7. Paraffin wax
8. Plastic sleevers
8
7 6
6. Initial use
• Remove the packaging material.
• Make sure that all parts specified in the Included in delivery list
are contained (see 1. Included in delivery).
• Check the paraffin bath and mains cable for damage.
• Place the paraffin bath on a flat, secure, even and water-
resistant surface or table.
• Make sure that the paraffin bath is empty before filling it with
paraffin wax.
• Remove the paraffin wax from its plastic packaging.
• Put the desired amount of paraffin wax (minimum 0.9 kg,
maximum 1.35 kg) into the paraffin bath. In order to make it
easier to put the paraffin wax into the paraffin bath, break up
the blocks of paraffin wax.
Important
Make sure that the paraffin bath is always filled with paraffin wax
up to at least the MIN fill indicator line before use.
1
2
3
4
5