Beurer HDE 15 - Manual (Page 12)

12
5. unit description
1
2
8
7
6
4
3
5
1 Removable, rotating professional nozzle
2 Folding device handle
3 Voltage switchover
4 Anti-kink protection with hanging eyelet
5 Mains cable
6
Cold air button
7 Sliding switch with three settings:
0 Off
1 Low air flow, warm air
2 High air flow, hot air
8 Protective grille with lint filter
6. Operation
Important
• Set the correct operating voltage (100-120 V
or 220-240 V) before using the device for the
first time.
• If you do not know the local mains voltage,
request it from the relevant organisation.
• Do not jam the mains cable [5] in drawers or
doors, for example.
• Untangle the mains cable [5] if it is twisted.
• Do not pull, twist or bend the mains cable
[5] and do not pull or route it over/on sharp,
pointed objects or hot surfaces.
Warning
• Position yourself on a dry, non-conductive
surface.
• Make sure that your hands are dry!
• Dry your hair with a towel beforehand.
• The professional nozzle [1] and device may
become very hot depending on the switch
setting and period of use – risk of burns and
fire!
• Do not touch the professional nozzle [1].
• Allow the professional nozzle [1] to cool down
before removing it.
• Place the device on fireproof surfaces only.
• Ensure that no highly flammable liquids are
located near the device.
• Do not use the device on synthetic hair – risk
of fire!
• Ensure that no hair can be directly sucked into
the device.