Beurer HDE 40 User Manual

Page 13

Advertising
background image

12

13

• Depending on the switch setting and duration

of use, the volume diffuser [1], professional

nozzle [9] and hair dryer can become very hot

– burn and fire hazard!

• Do not touch the volume diffuser [1] and the

professional nozzle [9].

• Let the volume diffuser [1] and professional

nozzle [9] cool down first before you remove

them.

• Place the hair dryer only on a non combusti-

ble surface.

• Ensure that there are no highly flammable

liquids in the vicinity of the unit.

• Do not use the unit on artificial hair – fire

hazard!

• Ensure that no hair can be directly sucked in.

note

After switching on the unit for the first time, a

light odour develops for the first minutes. This

is normal and not hazardous to your health. Let

the unit run for three to five minutes. Then you

can use the unit normally.
• If the unit becomes overheated, it switches off

automatically for your safety.

• Remove the plug from the socket and let the

unit cool down.

• Before switching the unit on again, check the

air outlet [2] and the filter [3] for blockage (e.g.

sucked-in lint, dust, hair).

• Switch on the hair dryer with fan and tempera-

ture button:

Gentle airflow

Strong airflow

• Select the heat level:
Low temperature
Medium temperature
High temperature
• Dry and/or style your hair as you wish.

after each use/at each break, always switch off

the hair dryer at the fan switch [6] (setting 0).

Cold air setting

Function

Description
The cold level offers the

perfect styling finish. It

cools down your hair and

holds it in place for a better

result.

You can enable the cold

level at any time by holding

down the button. As soon

as you release the button,

the previously selected heat

level returns.

accessories

The following attachments are provided:
• Volume diffuser [1]: Gives the hairstyle volume

and vitality.

• Professional nozzle [9]: Enables targeted and

precise styling and shaping.

after use

• Remove the plug from the socket after each

use.

• Let the unit cool down.
• Do not wind the mains cable around the unit!
• Store the unit in a dry place that is out of

reach of children.

• The unit can be hung on a hook by the han-

ging eyelet [7].

Advertising