Beurer PS 45 - Manual (Page 11)

11
9. What if there are problems?
If the scale detects and error when measuring, the following is displayed.
Display Cause Remedy
0Ld
The maximum load capacity of
180 kg was exceeded.
Do not load the unit with over 180 kg.
Lo The batteries are almost empty. Replace the batteries.
No measurement possible
Possible errors Remedy
The batteries in the scale are empty. Replace the batteries.
Incorrect weight measurement
Possible errors Remedy
Scale is on carpeting. Place the scale on a level and solid surface.
Incorrect zero point of scale. Place a scale on a secure, flat surface. Switch on the
scale and wait until the scale automatically switches
off again (do not step onto the scale before then).
Then switch on the scale again and repeat the meas-
urement.