Beurer BY 33 - Manual (Page 26)

26
Faults Actions
The signal is weak,
the connection
keeps breaking up
or there is interfer-
ence.
• If another technical device such as a microwave is
in the area between the parent and baby units, re-
move the device or switch it off.
• Check whether other factors, such as trees etc. are
in the path of the two devices, and change the po-
sition of the devices until the parent unit signals a
connection.
• Check whether the baby and parent units are in-
side the respective receiving range.
No acoustic signal
sounds from the
parent unit.
• Adjust the volume on the parent unit.
A device switches
itself off.
• Replace the batteries or recharge the battery (par-
ent unit).