Beurer LB 88 - Manual (Page 17)

17
5. Unit description
1. Control dial
1
11
2
3
12
4
5
7
8
15
14
9
10
13
6
2. Illuminated operating loop for dis-
playing the operation
3. Button for activating the water
evaporation
4. LED display water evaporation
level 1
5. LED display water evaporation
level 2 (if 4+5, level 3 lights up)
6. Water level indicator
7. Recessed grip (when removing
the mist outlet)
8. Water tank
9. Base unit for air humidifier
10. Water tank screwed plug
11. Fill level sensor
12. Air outlet
13. Aroma compartment
14. Mist outlet with two nozzles
15. Pad
Functional layout
A High-frequency vibrations release tiny drops from the surface of the
water.
B The fan air flow transports the humid air out into the room.
C Water evaporation can also be switched on.
D If you wish, the device can be used with aromas.
6. Initial use
• Open the cardboard packaging.
• Now remove all plastic films.
• Check the device, mains plug and cable for damage.
Fill with water
• When filling the tank with water, disconnect the plug from the mains.
• Remove the misting outlet nozzles.
• Lift the water tank by the recessed grip and turn it upside down.
• To fill the tank, open the screwed plug underneath it.
• Now fill the tank with water. The water tank holds a maximum of six litres, and the water level is visible
from the outside.
• Lock the water tank with the screwed plug.
• You may now optionally insert the anti-lime pad (15) into the evaporator pan. We recommend doing so if
you live in a hard water area.
• The tank should sit tightly on the base unit.
• Check whether the misting outlet nozzle is positioned correctly on the water tank.
A
B
C
D