Blackstar HT Soloist 60 - Manual (Page 7)

13 12
11. Footswitch Mode
This switch allows a choice of two modes of behaviour for the footswitch.
With the switch in the OUT position (2 CH+Boost), Boost operates independently of
channel selection and will be applied to either the Clean or Overdrive channel according
to which is currently selected. Repeated selection of the Boost footswitch will toggle the
Boost function on and off.
With the switch in the IN position (‘3 Channel’), selecting Boost will automatically select
the boosted Overdrive channel. To exit Boost mode the player then selects either Clean
or Overdrive which returns the amplifier to the non-boosted Clean or Overdrive channel.
12. Footswitch
The supplied 4-way footswitch is connected here. The footswitch enables you to switch
between the Clean and Overdrive channels, select the specially voiced Boost and switch
the Reverb on or off.
Technical Specification:
Power (RMS): 60 Watts
Valves: 2 x ECC83, 2 x EL34
Weight (kg): 24.4
Dimensions (mm): 619 x 566 x 297
Footswitch: FS-6 supplied
English
English