Bladez Fitness Cascade Rower - Manual (Page 13)

13
ASSEMBLY INSTRUCTIONS
STEP 1
Fit the Front Stabilizer (F) to the Main Frame
(B) and secure it with 2 of M8xP1.25x55L
Carriage Bolts (I-1), 2 Flat Washers (I-2), and
two Nuts (I-3). Make sure they are securely
tightened.
STEP 2
Fit Pedal Holder (E) to the Main Frame (B)
and secure it with 4 M8xP1.25x20L Screws
(I-4) and 4 Flat Washers (I-2).
Remarks: Do not screw one set of the
M8xP1.25x20L Screws and Flat Washers too
tightly at one time. It is better to fix the four
sets firmly at the same time to allow you to
change angles and to level easily.