Boland Communications d Series - Manual (Page 10)

High Bright Monitors
Description
The High Brite Option is a factory-installed accessory for an LCD video monitor to boost its
brightness to full daylight readability. The 12 and 15" displays are specified at about 1800
nts (cd/m²).
Operation
In addition to the standard button controls
of a normal monitor, a knob is added to
the front panel to control the brightness of
the internal lamps. With a range of nearly
100:1, the brightness can be adjusted to
outdoor daylight conditions down to
minimum for night use. Power
consumption is much reduced at less
than the full setting. The brightness can
be set to any value without having to
change electronic video adjustments via
the menu system (Brightness in the menu
means the video adjustment of the glow
in the black areas of the picture. Contrast
is used to set the whiteness of the lightest
areas of the picture.)
Note: DayBrite models usually have a fan switch located in the well area. Use the fan ise,
at noon in the sun, you will need the HI setting. Without sunshine or full CW, low or off may
be sufficient to keep the cabinet cool.
9 V IEW P ORT Manual d series