Bronkhorst EX-FLOW Mass Flow User Manual
Instruction manual, Explosion proof flow measurement and control atex
Advertising
Instruction manual
Explosion proof
Flow Measurement and control
ATEX
Doc. no.: 9.17.028N Date: 29-10-2014
ATTENTION
Please read this instruction manual carefully before installing and operating the instrument.
Not following the guidelines could result in personal injury and/or damage to the equipment.
Related drawing.
No modifications permitted without
approval of the authorised person
.
Advertising
Table of contents
Document Outline
- Warranty
- Check if the piping system is clean. For absolute cleanliness always install filters to assure a clean, moisture- and oil-free gas stream.
- Electrical connections must be made with a standard cable or according to the hook-up diagram in the back of this manual.
- Apply power to the instrument and allow for approx. 30 minutes to warm-up and stabilize. This may be done with or without fluid pressure, applied to the system.
- Blank Page