BUG-O Systems HOB-O - Manual (Page 7)

7
HOB-5100-f DC DRIVe UNIt
DRIVe UNIt OPeRatION:
Rotating Cam Knob (B) will move drive pinion in and out of engagement with
the ring gear.
To disengage the drive pinion from the ring gear, loosen the 1/4-28 Wing Nut
(a) and turn Knob (B) counter clockwise. Turn Knob (B) clockwise to engage
the drive pinion with the ring gear, re-tighten the 1/4-28 Wing Nut (a) to lock
in position.
When Power Cord (C) is plugged into the appropriate power source, Pilot
Light (D) will glow. Switch (e) controls direction of travel, with the center posi-
tion as “OFF”, Knob (f) controls speed. Circuit Breaker (G) protects the unit
against overload or electrical faults.
CaUtION: If the Circuit Breaker (G) opens, fIND and CORReCt CaUse
Of faILURe BefORe ResettING.
NOte: For DC Drive Unit details, see page 10 and 11.
*NOte: Speed and load ratings apply at radius of ring gear. Speed is proportional to radius at
any other point, and load rating is inversely proportional to radius.
teCHNICaL Data:
HOB-O DRIVe UNIt
Power HOB-5100-F 120150-60/1
Requirement: HOB-5102-F 240/50-60/1
HOB-5104-F 42/50-60/1
Dimensions: 7.12"l x 6.63"W x 6.75"H
(181 x 168 x 172 mm)
Net Weight: 10 lbs. (4.5 kg)
speed: *5-100 ipm (127-2540 mm/min)
(Measured at Drive Pinion)
Load Capacity: *10 lbs. (4.5 kg) Vertical
(Measured at Drive Pinion)
D
a
f
B
e
G
C
14
HOB-1149 Vacuum Support Bar (Fixed) Includes items 6, 9,10,12,13, and 15.
HOB-1151 Vacuum Support Bar with Swivel Includes items 1, 2, 6, 9,10,12,
and 15.
VaCUUM sUPPORt KIt
HOB-VACUUM BASES can be mounted on any HOB-O.
Four Cup Vacuum Bases HOB-1140 adjust to curved surfaces.
Three Cup Vacuum Bases HOB-1146 are designed for use on flat surfaces.
Each Vacuum Cup holds 12" (305 mm) of mercury vacuum. (Dirt and scale
block vacuum lines; blow-out when clogged).
Keep flame 4" (101 mm) away from cups when burning or welding. Silicone
Vacuum Cups will withstand a temperature of 600 0 F (318 0 C).
14
3
1
2
5
10
6, 16
12
9
11
15
7
4 14
7
5
6, 16
9
8
IteM PaRt NO. HOB-1140 HOB-1146 DesCRIPtION
Qty Qty
1 ARM-2242 4 Swivel Screw
2 ARM-2243 4 Swivel Spring
3 ARV-1004-14 4 Hose-14" (355 mm)
4 ARV-1004-18 3 Hose-18" (457 mm)
5 ARV-1005 8 6 Hose Clamp
6 ARV-1021 4 3 1/4 NPT “T”
7 ARV-1018 1 1 qC MAlE w/Barb
8 ARV-2020 Vac. Pump Kit 120/50-60/1
ARV-2030 Vac. Pump Kit 240/50-60/1
9 ARV-1034 4 3 Choke Nipple
10 ARV-1107 8 6 3/8" Hose Barb 1/4 NPT
11 ARV-1109 1 1 Protective Cap
12 ARV-1116 4 3 Vac. Cup (Silicone) 50lb (22.7kg)
13 FAS-0357 3 Hex Hd Cap Scr 1/4-20 x 3/4
14 HOB-1044 1 1 Magnet Ring
15 HOB-1152 4 3 Bar
16 ARq-1125 4 3 1/4 NPT Close Nipple Brass
HOB-1140 HOB-1146