BUG-O Systems CW-7 User Manual

Page 2

Advertising
background image

2

SAFETY

PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR DEATH. KEEP

CHILDREN AWAY. BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE

AND REPAIR PROCEDURES ARE PERFORMED ONLY BY QUALIFIED INDIVIDUALS.

EQUIPMENT DAMAGE

POSSIBLE.

ELECTRIC SHOCK can kill.

1) The equipment is not waterproof.

Using the unit in a wet environment

may result in serious injury. Do not

touch equipment when wet or standing

in a wet location.
2) The unused connectors have power on

them. Always keep the unused

connectors covered with the supplied

protective panels. Operation of the

machine without the protective panels

may result in injury.
3) Never open the equipment without

first unplugging the power cord or

serious injury may result.
4) Verify the customer-supplied power

connections are made in accordance

with all applicable local and national

electrical safety codes. If none exist,

use International Electric Code (IEC)

950.
5) Never remove or bypass the equip-

ment power cord ground. Verify the

equipment is grounded in accordance

with all applicable local and national

electrical safety codes. If none

exist, use International Electric

Code (IEC) 950.

READ INSTRUCTIONS.

Read the instruction manual before

installing and using the equipment.

1) Do not plug in the power cord with

out first verifying the equipment is OFF

and the cord input voltage is the same

as required by the machine or serious

damage may result.
2) Always verify both the pinion and

wheels are fully engaged before apply-

ing power or equipment damage may

occur.
3) Do not leave the equipment

unattended.
4) Remove from the worksite and store in

a safe location when not in use.

1) Never try to stop the pinion from

moving except by removing power or

by using the STOP control.
2) Do not remove any protective panels,

covers or guards and operate

equipment.

MOVING PARTS can

cause serious injury.

FALLING EQUIPMENT

can cause serious

personal injury and

equipment damage.

Faulty or careless user installation is

possible. As a result, never stand or

walk underneath equipment.

Advertising