BUG-O Systems CAS-2060 - Manual (Page 5)

5
INTROdUCTION
The CAS-2060 is an Automatic Height Control (AHC) for the Pendulum Weaver (WPD-2100) that
controls the welding tip to work distance and maintains a constant weld current, helping to provide
uniform weld penetration. AHC senses the actual weld current, compares this value to the set point, and
raises or lowers the welding gun accordingly. It features a built-in time delay after the arc is struck, and
automatically shuts off when the current drops too low (generally below 60 amps).
The CAS-2060 Automatic Height Control is available as original equipment or as a retrofit unit designed
to provide automated height control on the BUG-O Modular Drive Systems (MDS) with a Pendulum
Weaver (WPD-2100). Height Slide Assembly (CAS-1500) replaces the welding clamp originally supplied
on the Pendulum Weaver.
SPECIFICaTIONS
Weight (Net): 14.5 lbs (6.6 kg)
Travel: 2" (50.8 mm)
Carrying Capacity: 10 lbs (4.5 kg)
Operating Range: 60 to 500 Amps
ITEMS SUPPLIEd
CaS-2060 Automatic Torch Height Control for WPd-2100 Pendulum Weaver includes:
CAS-1500 Height Slide Assembly
CAS-1550 Hall Effect Current Sensor Assembly
CAS-1558 Pendulum Weaver Adaptor for CAS-1500
CAS-2051-10 MDS AHC 10' (3.0 m) Remote Control
CAS-2055 MDS AHC Control Box
ALL BUG-O Automatic Height Controls require
a Constant Voltage (CV) Power Source.