BUG-O Systems STW-3000 - Manual (Page 6)

6
CONTROLS (MAIN):
VOLTAGE CONTROL: Set on Lincoln LN-10 Control.
WIRE SPEED CONTROL: Set on Lincoln LN-10 Control.
WIRE JOG: Jog wire forward and reverse using the controls on the Lincoln LN-10 Control.
WELD CONTACTOR ON/OFF SWITCH: Allows operator to turn the contactor on or off for the
assigned welding torch.
SHIELD GAS PURGE: Allows operator to activate shield gas solenoid to purge welding gun and
check the gas rate on the assigned regulators.
MAIN WELD CYCLE START: Initiates automated weld cycle.
MAIN WELD CYCLE STOP: Halts automated weld cycle.
TRAVEL MANUAL JOG: Allows operator to move the unit forward or backward without welding.
EMERGENCY STOP: When pressed causes all functions to stop.
PROGRAMMING CENTER: See controls for programming center pg. 7.
Programming Center
Emergency Stop
Shield Gas
Purge (A)
Main Weld
Cycle Start
Travel
Manual
Jog
Main Weld
Cycle Stop
Shield Gas
Purge (B)
Weld
Contactor
Switch A
Weld
Contactor
Switch B