Burst Electronics DV-1 - Manual (Page 2)

DV-1 Serial Digital to Analog Converter
DV-2 Analog to Serial Digital Converter
Congratulations on your purchase from Burst
Electronics Inc. This manual will cover the operation of the
DV-1 Serial Digital to Analog Converter and the DV-2 Analog
to Serial Digital Converter.
DV-1
The Model DV -1 converts Serial Digital into Analog Video.
Features include
jumper selectable for
either Composite or S-
Video Output, as well
as NTSC, PAL-B
(Europe), or PAL-M
(Brazil). The DV-1
provides 4:2:2 270
Mbit SMPTE 259M,
and 10-bit decoding.
The DV -1 can also be
used as a Full Field
Colorbar Generator.
DIP Switch Settings;
Video Standard Settings
#1 Down, #2 Down = NTSC
#1 Up, #2 Down = PAL-B (Europe)
#1 Down, #2 Up = PAL-M (Brazil)
Composite, S-Video, Colorbar Generator Settings
#3 Down = Pedestal On (NTSC Only)
#3 Up = Pedestal Off
#4 Down = Composite
#4 Up = S-Video
#5 Down = SDI - Analog (Normal Mode)
#5 Up = Full Field Colorbars (Serial Digital
input required)
DV-1 SDI - Analog Converter & DV -2 Analog—SDI Converter 2