Burst Electronics F2B User Manual

Page 5

Advertising
background image


Power is supplied by a 12 Vdc 500 mA wall module
(included). Any 12 Vdc source may be used
(camera battery pack or equivalent). The center pin
for the power supply is negative.

VMF-2 Operation

The VMF-2 will fade from A to B, B to A, or A to
Black. The operation can be done manually via the
RCU’s fader bar or automatically via the

TAKE

pushbutton or remote GPI trigger.

A to B, B to A Fade

Preset the fader bar to A. Select

MANUAL Mode with

the top pushbutton of the RCU, the Red LED will be
on, indicating manual operation. Also, select

A TO B

on the

MODE switch of the RCU, the Green LED will

be on. Sliding the fader bar will now fade from
channel A to channel B, and from channel B to
channel A.

A to Black

Preset the fader bar to A. Select

A TO BLK on the

MODE switch, the Red LED is on. Operation of the
fader bar will now fade channel A to Black, and from
Black to A. This operation strips the active video
from the signal leaving behind the sync, color burst
and black. No B input is required for A to Black
operation.

Take Mode

Select

AUTO on the MODE switch. The speed of the

TAKE is now controlled by the position of the fader

Video Mixers & Faders

3

Advertising
This manual is related to the following products: