Burst Electronics SG-7 - Manual (Page 6)

Specifications:
Input: 120Vac via wall module (12 Vdc 280mA)
Output: NTSC video, 1 Vpp into 75 Ohm, may be
open or shorted indefinitely without harm
Video Signal: SMPTE Color Bars / Black Burst, consisting
of the following;
Color Bars:
Sync at –40 IRE
Burst at +/- 20 IRE
Setup at 7.5 IRE
Fully saturated 75% bars (white, yellow,
cyan, green, magenta, red, blue)
Reverse blue bars (blue, black, magenta
black, cyan, black, white)
100 IRE whiter than white
-I and +Q signals
Pluge pulse signal:
Whiter than black at 11.5 IRE
Black at 7.5 IRE
Blacker than black at 3.5 IRE
Black Burst:
Black at 7.5 IRE
SG-3/7 Color Bar Generator 6