Cabasse Riga - Manual (Page 11)

INSTALL ATION
The components of your system:
■ 2, 3, 5, 6 or 7 Riga
■ 1 Cabasse active subwoofer
Riga on wall version
The wall bracket of Riga on wall has been designed to allow a
convenient positioning of the BC17 driver in many directions
+/- 43° in any direction, and to give the possibility to hide the
speaker cable in the wall with no apparent bolts or screws
1 .
Please follow step by step the instructions as shown in 2 .
Riga on base version
Riga on base is delivered with a little cradle, pose the sphere Riga
on this cradle. This system enables you to put Riga on a book-
shelf.
Floor standing Riga
The stand version is supplied with adjustable spikes for a per-
fect stability even if the floor is not horizontal.
Positioning of Riga
Positioning of the speakers: if possible, try to match with the
3 drawing, with the Cabasse subwoofer in the front area
facing the listening spot. Its position against a wall reinforces
the extreme low register and limits the reflections between 80
and 200 Hz. However to obtain the best result, it is always
necessary to carry out tests according to the acoustics of the
room.
CONNECTIONS
It is imperative to respect the correct phasing when connecting:
+ to + (red) and - to - (black).
Configuration 2.1 4
■ 2 Riga + 1 Cabasse subwoofer
Connect with speaker cables the amplifier outputs to the ter-
minals HIGH LEVEL INPUT L (left) and HIGH LEVEL INPUT R
(right) of the Cabasse subwoofer and connect the outputs
HIGH LEVEL OUTPUT L (left) and HIGH LEVEL OUTPUT R
(right) of the Cabasse subwoofer to the Riga inputs
5 .
Configuration 5.1 6
■ 5 Riga + 1 Cabasse subwoofer or
■ 2 main speakers + 3 Riga + 1 Cabasse
subwoofer
When the processor of your audio video amplifier includes a
2.1 set-up (subwoofer for stereo reproduction), connect each
speaker output of the 5.1 amplifier directly to the matching Riga
(front right, front left, centre, surround...). Connect the sub-
woofer CINCH RCA output of the amplifier to one of the CIN-
CH RCA LINE IN terminals of the Cabasse subwoofer
7 .
Then adjust the set-up menu of your audio video amplifier:
5 Riga + 1 Cabasse subwoofer
2 main speakers + 3 Riga + 1 Cabasse subwoo-
fer
*Adjustment in SMALL or LARGE, according to their ability in
reproducing deep low frequencies.
Some audio video amplifiers require these information:
If your audio video has an adjustable crossover frequency, the
adjustment will be 100 Hz.
ADJUSTMENTS OF THE SANTORIN 30i
AND SANTORIN 30 SUBWOOFERS
2 different models of amplifiers are fitting these subwoofers.
The connections are identical but the settings are different.
Please use the owner's manual of your subwoofer for phase
and delay adjustments.
FRONT SMALL
CENTER SMALL
SURROUND SMALL
SUBWOOFER / LFE YES
FRONT SMALL ou LARGE*
CENTER SMALL
SURROUND SMALL
SUBWOOFER / LFE YES
SUBWOOFER ONLY
SUBWOOFER stereo YES
e n g l i s h
With Riga, Cabasse proposes a wide palette of Hi Fi / audio video systems fitted with the
BC17, the latest of the SCS (Spatially Coherent System) coaxial range of drivers.
With these 2-way speakers combined with a Cabasse Cabasse active subwoofer, you can get a
very high quality system, either in a 2.1 configuration (standard stereo) or in a 5.1 configura-
tion (5 channels system) or 6.1 or 7.1...
Depending on your system - stereo or multi-channel - the size of the listening room, your taste
and demand, your Artis dealer will guide you in selecting your Cabasse subwoofer(s):
Santorin 25, Santorin 30i, Santorin 30.
Cab notice Riga 020309*:Cab notice Baltic Evo-6 06/07/09 12:17 Page11