Bg600sg, Before first use, Assembling the glass jar – Campomatic BG600SG User Manual

Page 3: Inserting the glass jar, How to use

Advertising
background image

bg600sg

ENG

2

12. Oversized foods or metal utensils must not be inserted in the appliance as they may

cause a fire or risk of electrical shock.

13. A fire may occur if the appliance is covered or touching flammable material including

curtains, draperies, walls and the like when in operation.

14. Do not clean with metal scouring pads. Pieces can break off the pad and touch

electrical parts, involving a risk of electrical shock.

15. Extreme caution should be exercised when using containers constructed of other

material other than metal or glass.

16. Do not store any materials other than manufacturers recommended accessories in this

unit when not in use.

17. Do not place any of the following materials inside the unit: Paper, cardboard, plastic

and the like.

SAVE THESE INTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!

Before first use

All parts of the blender are to be thoroughly cleaned before being used for the first

time. (see Section: Cleaning).

Take out the required length of cable from the cable tidy on the base of the blender

and connect the device to the mains supply.

Assembling the Glass Jar:

1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).

2. Put the blade unit with sealing ring into the cup base (6).

3. Insert the assembled Cup Base onto the bottom of the glass jar and secure tightly.

4. Mount the glass cup (3) onto the cup base unit and tune the cup base unit, and turn

clockwise until glass jar locks into place.

5. Mount the Measure Cup (1) onto the Lid (2).

6. Secure the Lid onto Glass Jar and press down.

Inserting the Glass Jar:

1. Make sure that the blender is switched off (Switch in the ‘0’ setting).

2. Place the jar assembly (7) on to the motor base (8) and press down until securely

engaged.

How to Use

A. Blender:

1. Place the foodstuff you wish to process into the glass jar.

2. Put the lid on the glass jar and close securely. Place the measuring cap into the hole

in the lid and turn clockwise to lock.

3. Switch on the motor base:

Speed setting

Use

1

for light usage with liquids

2-5

for more solid consistency – for mixing liquids and solid foodstuffs

0 stop operation
P

for ice crushing & short, powerful impulse movements

Advertising