Campomatic EP100 User Manual
Page 4
4
ep100 / ep200
such as curtains, cloth, etc… when it is in use, as a fire might occur.
Always unplug the appliance when it is not in use, especially since it is not equipped
with an on/off switch.
Be extremely careful, as oil or fat preparations might catch fire when overheated.
When using the appliance under an extractor hood, make sure to observe the minimal
distance advised by the producer. It is even wiser to double this distance.
Only use the appliance for food that is supposed to be cooked.
Your appliance must never be switched on through an external timer or any kind of sepa-
rate remote control system.
Immediately unplug the appliance if a crack appears and make sure it is controlled by a
qualified competent electrician
(*)
.
(*)
Competent qualified electrician: after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In any case you should return the appliance to this electrician.
USE
• First check that the voltage marked on the product is the same as your supply voltage.
• Select a suitable position close to an electric socket, on a dry and even surface.
• Make sure the controls are in the OFF position (MIN facing upwards). Plug in.
• The invisible protective coating must be removed before you can use the appliance.
To do this, set the controls to the maximum setting and leave switched on for approxi-
mately 10 minutes. Smoke will develop, make sure that the room is ventilated. Switch
off the cooking plates and allow to cool down completely. The cooking plates are now
ready for use.
• Always use flat-bottomed saucepans, which make good contact with the cooking plates.
The saucepan bases should ideally be of the same size as the cooking plates.
• Select the temperature. The cooking plates have a range of temperatures.
• Due to the cooking plates’ construction, residual heat will remain after switching off.
This may be used to keep food warm for a short period.
• After use, turn temperature dial to “MIN” and unplug the appliance from electrical
outlet.
EN