Campomatic FH200 - Manual (Page 3)

3
Safety Precautions
1. Don’t cover the fan heater at any time when operating.
2. Don’t hung it on the wall.
3. Don’t use it on the carpet with long fluff.
4. Don’t use the heater in the immediate surrounding of a bath, a
shower or a swimming pool.
5. Don’t insert sticks or any other objects to either the air inlet or
the outlet of the appliance.
6. Don’t put the appliance immediately below a electrical socket.
7. Don’t put the appliance near a fire.
8. Keep children away from the heater.
9. Keep flammable and explosive objects away from the heater.
10. In case of malfunction or abnormal operation, don’t attempt to
open or repair the appliance at home, send the heater to
appointed service agent for inspection and repair.
11. If the power cord is damaged, it must be replaced by the
appointed service agent or a similarly qualified person.
Operation instructions
1. Turn the thermostat switch to the minimal value, at the same
time turn the heat select switch to the “O” position (see
picture).
2. Plug in the appliance, and turn the thermostat switch to the
maximum position. Then turn the heat select switch to choose
air or warm air and the temperature of warm air as below.
While working the indicator light will be on.
2.1 Turn the heat select switch to “ “ position, the heater blows
cool air.
2.2 Turn the heat select switch to “I” position, the heater blows
warm air, working at 1000W.
2.3 Turn the heat select switch to “II” position, the heater blows
warm air, working at 2000W.