Ventilation requirements, Leveling, Description of the appliance – Campomatic FR450N User Manual

Page 6: View of the appliance

Advertising
background image

6

Ventilation Requirements

Ensure that the air can circulate freely around the cabinet. There should be 100mm between the
top of the appliance and any overhanging furniture, and a gap of 25mm on either side of the
appliance.
Ensure that the appliance does not stand on the electrical supply cable. Parts that heat up should
not be exposed. Whenever possible the back of the appliance should be close to a wall but
remember to leave the suitable distance required for ventilation.

Leveling

The appliance should be level in order to eliminate rocking. To make the appliance level, it
should be upright and both adjusters should be firmly contacted with the floor. You can also
adjust the level by screwing out the appropriate level adjuster at the front (use your fingers or a
suitable spanner), but much care should be taken when moving this appliance as it may be heavy.

Description of the Appliance

View of the appliance

1

2

3

4

5

6

7

8

9

10

1. Control panel 2. Lamp (inside) 3. Air outlet 4. Shelf 5. Crisper cover

6. Crisper drawer 7. Door rack cover 8. Egg rack(inside) 9. Door rack 10. Door lower rack

Note:

Due to the updated modifications of our products, your refrigerator may differ slightly from this Instruction

Manual, but the functions and using methods remain the same.

Advertising
This manual is related to the following products: