Campomatic FR770M - Manual (Page 7)

P lacement
S tart
The refrigerator is placed in a
well-ventilated indoor place;
the ground shall be flat, and
sturdy (rotate left or right to
adjust the wheel for leveling if
unstable).
The refrigerator shall stay
for half an hour before
connecting power when
it is firstly started.
The refrigerator shall run
2 to 3 hours before loading
fresh or frozen foods; the
refrigerator shall run for
more than 4 hours in
summer in advance
considering that the
ambient temperature is
high.
Before using the
refrigerator, remove all
packaging materials
including bottom
cushions and foam pads
and tapes inside the
refrigerator, tear off the
protective film on the door
and the refrigerator body.
Please leave enough space to
ensure feasible opening and
drawer removal.
Dimensions shown are for
reference only.
Keep away from heat and
avoid direct sunlight. Do not
place the freezer in moist or
watery places to prevent rust
or reduction of insulating
effect.
The top space of the refrigerator
shall be greater than 30cm, and
The refrigerator should be placed
against a wall with a free distance
more than 5cm and not exceeding
7.5mm to facilitate the opening and
closing and heat dissipation.
Wipe the refrigerator inside and
outside with warm moist rag (add
a small amount of Neutral detergent
in the warm water and wipe clean
finally with clean water).
P ro per u se o f r ef ri ger at ors
Ic e M a chine
1) Drinking water is filled in a measuring cup firstly.
The maximum amount of water is up to the mark
MAX ;
2) Cold water in the measuring cup is added into the
ice machine according to the method shown in Fig.1.
Ice blocks will be formed several hours later after the
door of the freezing chamber is closed.
3) Turning clockwise knob on the ice machine 110
can make separation of ice block with ice box.
Please close the door gently in order to avoid water spilling from
the ice machine
Lamp replacement by professionals
Me a suring c up Ic e m a c hine
Ic e m a c hine Knob
1270mm
750mm
12
40
m
m
65
2m
m
Fig.1 Fig.2
Illumina ting la mp a nd r eplacement
Fr770m