Campomatic FRZ360N - Manual (Page 17)

GB 17
913
SWITCHING ON THE APPLIANCE
Close the door, insert the plug in the mains socket and set the required temperature. Allow the fridge to run empty
until the set temperature appears on the display, then place the food in the compartment and close the door.
T3 SETTING THE TEMPERATURE
To start the appliance, press button “T3” for at least 0.5 seconds To stop the appliance, press button “T3” for 4
seconds. The symbol “—” (fi g. a) will appear on the display. During normal operation, the display will indicate
the internal temperature with the symbol “S3” (fi g. b). The display indicates the values of the internal temperature
between +20°C and -40°C. Temperatures higher than +20°C (e.g. +21°C) are indicated by the letter “H” (fi g. c).
The temperature can be set between -18 and -24 °C.
PROGRAMMING AND ADJUSTING THE TEMPERATURE
Press button “T3” once. The programmed temperature will fl ash for 6 seconds (fi g. d). When button “T3” is re-pressed,
the temperature setting changes. The temperature reduces by 1°C for each clock down to -24°C, after which the display
restarts from -18°C. The new setting will be memorised after “S3” stops fl ashing.
CHECKING THE PROGRAMMED TEMPERATURE
Press button “T3” once. The programmed temperature “S3” will fl ash for 6 seconds (fi g. d), after which the actual
temperature inside the compartment will be displayed. The programmed functions will stay in the memory even in the
case of a power cut or when the appliance is disconnected from the mains supply
USING THE FREEZER COMPARTMENT Mod. B
T3 S3
Fig.a
Fig.b
Fig.c
Fig.d
T3
S3
S3