Campomatic JS700 - Manual (Page 5)

6
6. Slide the pusher into the feeding tube by
aligning the groove in the pusher with the small
protrusion on the inside of the feeding tube.
7
7. Place the juice jug under the spout. Place
the lid on the juice jug to avoid splattering or
if you want to store the juice in the refrigerator.
8. To separate the foam from the juice when pouring the juice into a
glass, insert the foam separator by sliding it into the juice jug .
9. The appliance will only function if all parts have been properly
assembled and the lid has been properly locked in place with the handle .
---Wash the fruit /vegetables well and cut them into picecs that fit into
the feeding tube without forcing.
---Make sure the juice jug has been placed under spout.
10. Plug cord plug into the power socket, switch the appliance on by
turning the control knob to setting "Ⅰ"(lower speed) or "Ⅱ"(normal
speed).
---Speed Ⅰ is especially suitable for soft fruits and vegetables. Such
as watermelons、 grapes、 tomatoes、 cucumbers and raspberries.
---Speed Ⅱis suitable for all kinds of fruits and vegetables.
11
12
11. Put the pre-cut pieces in the feeding tube .
12. Gently press them down towards the rotating
filter by means of the pusher.
Notic e :
do not exert too much pressure on the
pusher, as this could affect the quality of the
end result and it could even cause the filter to
come to a halt, never insert your fingers or an
object into feeding.
Attention: If you want your drink to have a foamy layer, do not use the
foam seperator!
JS700
4