Campomatic WM909XE Turbologic XXL - Manual (Page 21)

ADJUSTING THE WASH WATER TEMPERATURE
In order to adjust the temperature:
Press the menu button once after selecting the programme and the
(additional) function(s) you will use.
The electronic indicator will show the wash temperature for the
programme you selected.
You can reduce this temperature value down to the wash
temperature value you prefer by using the select button.
If you wish to wash your laundry in cold
water press the select button until the
electronic indicator will read “CLD”.
If you have skipped the temperature level you prefer you can readjust
it by continuously pressing the select button.
If you wait for longer than five seconds without pressing any button on this
menu the electronic indicator will return to the start.
SETTING THE PROGRAMME STARTUP TIME
In order to set the programme startup time of your machine:
Press the menu button twice after selecting the programme and the
(additional) function(s) you will use.
The electronic indicator will read “0 h”.
Specify after how many hours you wish the programme you selected
to start and adjust this delay time by using the select button.
The delay time can be set at a value between 1-23
hours.
In order to set the delay time:
Set the delay time you prefer by using the select button.
The electronic indicator will flash the “h” next to the delay time.
You can activate the delay time by pressing the start/hold button
once.
20