Caple C5220 - Manual (Page 6)

6
650
mm
450
mm
300 mm
2 - Location
FOR THE INSTALLER
The appliance afford type “X” protection against overheating of surrounding
surfaces. The appliance must be kept no less than 300 mm away from any side wall
which exceed the height of the cooktop (fig. 2.1).
The furniture walls adjacent to the cooker must be made of material resistant to heat. The
veneered syntetical material and the glue used must be resistant to a temperature of
120°C in order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a
room containing a bath or shower.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
Secure the four feet in the holes on the base of the appliance and adjust the height.
The cooker must be installed by a qualified technician and in compliance with
local safety standards.
Fig. 2.1