Caple CM118 User Manual

Page 12

Advertising
background image

9. Auto Menu

8. Pre-set Function

1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Three stages can be set . Defrosting should not be set in
preset function.Auto menu can be set single stage only.

12

5) Press " CLOCK/PRE-SET ", the minute figures will flash.

6) Turn " " to adjust the minute figures, the input time should be within 0--59.

4) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)

or 1--12(12-hour).

7) Press " START/+30SEC./CONFIRM " to finish setting. ":" will light, buzzer will
ring twice when the time arrives, then cooking will start automatically.

3) Press " CLOCK/PRE-SET ", current time displays and the hour figures flash.

1) In waiting state, turn " " right to choose the function wanted,

and "A1","A2","A3"...."A10" will be displayed.

2) Press "START/ +30 SEC./CONFIRM" to confirm the menu you need.

3) Turn " " to choose the weight of menu,and "g" indicator will light.

4) Press "START/ +30 SEC./CONFIRM" to start cooking.

Example: if you want to cook with 80% microwave power for 7 minutes.

a. Press"MICROWAVE" once;

b. Press " MICROWAVE" for times or turn " " to choose 80% microwave power till

"P80" display;

c. Press "START/+30SEC./CONFIRM" to confirm;

d. Turn " " to adjust the cooking time of 7 minutes;

After the above steps, please do not press " START/+30SEC./CONFIRM ". Then

do as following:

Note: clock must be set first. Otherwise,pre-set function will not work.

eral minutes, the buzzer sounds

twice to remind you to put the cake into the oven. After putting the cake in the oven, please
press "Start/+30Sec./Confirm" again. The timer will count down, and the cake will be
cooked perfectly.

5) Press "START/+30SEC./CONFIRM" to confirm;

6) Turn " " to adjust the cooking time of 7 minutes;

7) Press "START/+30SEC./CONFIRM" to start cooking.

Note: When you choose A8 cake, please do not put the cake into the oven at the begining.
The oven needs to be preheated to 180 degree first. After sev

Advertising
This manual is related to the following products: