Caple C270GSS - Manual (Page 14)

14
A
U
T
O
P
A
U
T
O
P
Fig. 3.7
Fig. 3.8
SEMI - AUTOMATIC COOKING
This is used to switch automatically off
the oven after the desired cooking time
has elapsed.
To effect the semi-automatic cooking
there are two way:
1. Set the length of the cooking time by
pushing the
button and the button
to advance, or to go backwards if
you have passed the desired time (Fig.
3.7).
or
2. Set the end of the cooking time by
pushing the
button and the but-
ton to advance, or to go backwards
if you have passed the desired time
(Fig. 3.8).
AUTO and the symbol will be on.
Then set the temperature and the cook-
ing program using the oven switch and
thermostat knobs (see specific chap-
ters).
The oven is switched on and it will be
switched of automatically at the end of
the desired time.
During cooking, the
symbol remains
on and by pressing the button you
can see the time that remains till the end
of the cooking.
The cooking program can be can-
celled at any moment by pushing the
button.
At the end of the cooking, the oven and
the
symbol will turn off, the AUTO
will flash and a buzzer will give off; that
can be stopped by pushing any of the
buttons.
Turn the switch and thermostat knobs to
zero and put the programmer onto “man-
ual” by pressing the
button.