Deni 4900 - Manual (Page 3)

2
®
FEATURES
Press top portion of
button to remove cork
from wine opener
Press bottom portion of button
to turn on and remove cork
from bottle
Foil Cutter
Charging Stand
Operating Your Wine Opener
1. Remove the foil from the cork by placing the foil cutter
over the foil wrapper and twisting. The blade in the foil
cutter will slice the foil wrapper allowing you to remove
the foil easily.
2. Place the wine opener on top of the cork.
3. Press the lower portion of the button. The cork screw
in the unit will automatically pull the cork out of the
bottle. Lift up the wine opener when complete. The
cork will be inside the unit.
4. Eject the cork from the wine opener by pressing the
upper portion of the button.
Charging The Battery
1. Place the charging base on a flat safe surface.
2. Plug the power cord into a wall outlet.
3. Place the unit into the charging base. The green
charging light will illuminate during the charging
process.
Note: To ensure that the battery will receive full power, you
must charge the battery for at least 16 hours prior to
the first use. The charging process after the initial
charge will take between 12-16 hours.
This appliance contains a Ni-Cd rechargeable battery
which must be disposed of properly.