Daitsu ASD 129U11 - Manual (Page 89)

ENGLISH
87
REMOTE CONTROLS AND THEIR FUNCTIONS
Remote control
ECONOMY RUNNING BUTTON
• Push this button to set the economical
operation mode (some models without).
ON/OFF TIMER BUTTON
• Push TIMER ON timer button to set the
ON timer.
• Push TIMER OFF timer button to set the
OFF timer.
TIME ADJUST BUTTON
• This button is used for setting the current
time and OFF time.
CANCEL BUTTON
• Push this button to cancel ON timer and
OFF timer.
RESET BUTTON
• When you push the RESET button, all
current settings are cancelled and get into
the condition of beginning. In the clock,
the colon in "0:00" will flash, the mode
displays "AUTO", fan speed displays
"AUTO" the temperature displays "24".
WIND DIRECTORY BUTTON
• Push this button to change the swing
angle of louver. (This is not conform to
the unit without this function.)
AUTO LOUVER BUTTON
• Push this button to swing louver. Push the
button again to stop.
RESERVE BUTTON
• Push this button to reserve ON timer and
OFF timer settings.
CLOCK BUTTON
• Push this button to set time.
LOCK BUTTON
• When you push the LOCK button, all
current settings are locked in and the
remote controller does not accept any
operation except that of the LOCK button.
Use the lock mode when you want to pre-
vent setting from being changed acciden-
tally or playfully. Push the LOCK button
again when you want to cancel the LOCK
mode.
• The remote controller above drawing may have some differences from the one that you purchase.
06ManualMandoDaitsuEng 21/12/06 16:17 Página 87