Dukane 8913-W - Manual (Page 8)

6
Connecting your devices (continued)
WARNING ►Do not disassemble or modify the projector and accessories.
► Do not touch the SD card while being accessed.
CAUTION ►The designated wireless network card that is sold as an option
is required to use the wireless network function of this projector.
►The wireless network card is not permitted to be sold or used in some
countries and regions. Use the card only in the country or region where you buy
it. For more information, contact to your dealer.
NOTE • When using the projector with a wired LAN, please remove the wireless network card.
Using a USB storage
In order to view images stored in a USB storage, such as a USB memory, insert the device
into the USB STORAGE slot.
Before removing the USB storage, be sure to perform the REMOVE MEDIA procedure
using the PC-LESS PRESENTATION menu under the MIU menu.
Using an SD card
In order to view images stored in an SD storage,
such as an SD memory card, insert the device
into the SD card slot. Or, in order to use the
wireless network function, load the internal clock
battery (14) and insert the designated wireless
network card into the SD card slot.
Inserting the SD card
.
Make sure that the power code is not plugged into the projector for the wireless
network card only.
2.
Remove the SD card slot cover. To remove it, it might be recommended to hook the
edge of its side face upward.
3.
Slowly insert the SD card completely into the SD card slot. Make sure that the angled
corner of the SD card is placed into the right side of the SD card slot, while inserting.
4.
Replace the SD card slot cover. It is recommended that the cover is slid sideways to
the projector.
Using the slot cover lock for security
Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.
.
Open the two plates of the slot cover lock to put the tips of two plates together, and
then insert the tips to the lock hole of the SD card slot cover.
2.
Put the body of the two plates together. Then, hook a padlock or combination lock to
the hole of the slot cover lock.
Removing the SD card
.
Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION menu
under the MIU menu for SD Storage card only.
2.
Turn the projector off and unplug the power code from the projector for the wireless
network card only.
3.
Remove the SD card slot cover. After taking the SD card away, replace the SD card
slot cover.
SD card slot cover
SD CARD SD CARD
Slot cover lock