Cata FS 20 BK - Manual (Page 35)

8.Multi-Stage Cooking
Two stages can be maximumly set. If one stages is defrosting, it should be put in the first
stage. The buzzer will ring once after each stage and the next stage will begin.
Note: Auto menu cannot be set as one of the multi-stage.
Example: if you want to defrost the food for 5 minutes, then to cook with 80%
microwave power for 7 minutes. The steps are as following:
1) Press " " twice, the screen will display "dEF2";
2) Turn " " to adjust the defrost time of 5 minutes;
3) Press" " once;
4) Turn " " to choose 80% microwave power till "P80" display;
5) Press " " to confirm;
6) Turn " " to adjust the cooking time of 7 minutes;
7) Press " " to start cooking.
9. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting should not
be set in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press" " once;
b. Turn " " to choose 80% microwave power till "P80" display;
c. Press " " to confirm;
d. Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " ". Then
do as following:
5) Press " ", the minute figures will flash.
6) Turn " " to adjust the minute figures, the input time should be within 0--59.
4) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ". The hour figures flash;
7) Press " " to finish setting. ":" will light, buzzer will
ring twice when the time arrives, then cooking will start automatically.
Note: clock must be set first. Otherwise,pre-set function will not work.
OK
OK
OK
OK
OK