Specifications and power requirements, Specifications, Power requirements – Cetacea Sound PAS I Presentation Audio System Owner's Manual User Manual
Page 10
Page 10
Specifications and Power Requirements
Specifications
Drivers (satellites) One 2 inch full-range per satellite
Drivers (subwoofer) One 4 inch long throw woofer and
one 5.25 inch passive radiator
System Freq. Response 47 Hz - 18 kHz @ -10dB
60 Hz - 17 kHz @ -3 dB
Satellite Power 7 Watts RMS per channel at < 10 %THD
5 Watts RMS per channel at < 1 %THD
Subwoofer Power 15 Watts RMS at < 10%THD
12 Watts RMS at < 1 %THD
Input Impedance 20K Ohms
Signal-to-Noise Ratio > 93 dB
Fuse Type 0.25 AMP 250V
“Slow Blow” (5x20mm size)
Crossover Frequencies:
Subwoofer 250 Hz Linkwitz-Riley
Satellites with subwoofer 200 Hz
Satellites without subwoofer 100 Hz
Power Requirements
USA/CANADA Model 120 Volts / 60 Hz AC
MAX Power Consumption 30 Watts
UL and cUL Approved