Dell fi-565PR - Manual (Page 21)

fi-565PR Imprinter Operator’s Guide | 17
6. Specifications
Item Specification
Printing Method Thermal inkjet printing
Print Timing Post printing
Printing Characters Alphabet : A to Z, a to z
Numeric Characters : 0, 1 to9
Symbols : ! ” $ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _` { | } ~
Maximum number of
characters per line Maximum 40 characters
Print orientation 0º, 180º (horizontal orientation), 90º, 270º (vertical orientation)
Character size Height 2.91mm × width 2.82mm (horizontal orientation) / 0.1146 × 0.1110 (inches),
Height 2.82mm × width 2.91mm (vertical orientation) / 0.1110 × 0.1146 (inches)
Character pitch 3.53mm (0.1390inches)
Document that can
be scanned Documents supported by fi-5650C
For the details, please refer to “fi-5650C Image Scanner Operator’s Guide”-“Chapter 8
Document Specification for the ADF.”
ATTENTION
Documents with glossy surface such as thermal paper, thermal transfer paper,
coated paper, and art paper take longer time for the ink to dry and may cause poor
print quality. The imprinter must be cleaned more frequently if you use these types of
papers.
Printing area
ATTENTION
Do not print less than 5mm of
the page margins.
Dimension Without Scanner : 413(W) × 164(D) × 246(H) mm / 16.26(W) × 6.46(D) × 9.69(H) inches
With Scanner : 428(W) × 746(D) × 296(H) mm / 16.85(W) × 29.37(D) × 11.65(H) inches
Weight 5 kg (11.02 lbs)
Ambient condition Temperature: 10 to 35ºC (50 to 95ºF), Humidity: 20 to 80%
Consumable Print Cartridge (P/N: CA00050-0262)
Replacement Cycle : 4,000,000 characters
(
The number of characters may decrease depending on the font selection.)
A=5mm
B=5mm
C=5mm
D=5mm
(0.20inches)
A B
C
D
Printing Area
(Back side)
Feed di
re
ctio
n