Dolby Laboratories STS75E - Manual (Page 13)

- 12 -
Setup
Notes :
• When you connect the Unit to other
equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connection.
• If the external equipment is a television and this audio system is closed to it, you may experience interference if the tuner function
is selected while the television is working.
• If you have a stereo VCR, make sure you set it in stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the resulting copy will be
unclear, with poor sound quality. This is NOT caused by a defective DVD system.
• Refer to the instruction manual of the connected equipment as well.
B. Connecting a VCR
1. Using the supplied Audio/Video cable,
connect the yellow plug from VIDEO
OUT jack on your Unit to VIDEO IN
jack on your TV, connect the left/right
AUDIO OUT jacks on your Unit to
left/right AUDIO IN jacks on your TV.
If you want the sound come from the
speakers of the Main Unit, you need
not to connect the left/right AUDIO
OUT jacks from the Main Unit to your
TV.
2. Using the Video cable (not supplied),
connect the VIDEO IN (VCR) jack on
your Unit to VIDEO OUT jack on your
VCR.
3. Using the Audio cable (not supplied),
connect the left/right AUDIO IN jacks
on your Unit to the AUDIO OUT jacks
on your VCR.
Analogue connection
Using the Audio cable (not supplied),
connect the left/right AUDIO OUT jack
on your Unit to the AUDIO IN jack on
the other analogue equipment.
Digital connection
Using the Coaxial Digital Audio cable
(not supplied), connect the DIGITAL
AUDIO OUT on your Unit to the
DIGITAL AUDIO IN jack on your
another equipment.
Listening to another audio
equipment
1. Turn on the Unit.
2. Turn on your audio equipment and
follow the instructions included with
it to select the AUDIO IN or
DIGITAL IN function.
C. Connecting another source
Watching a Videotape
1. Turn on the Unit, use the FUNCTION button on the remote control or the front panel to select "AV IN".
2. Turn on your TV and follow the instructions included with it to select the VIDEO input which corresponds to the VIDEO IN jack
that is connected to the Unit.
3. Turn on the VCR and follow the instructions included with it to play the videotape.
Notes:
•
If you have a mono VCR, the volume level from the speakers will be low. To avoid this, connect the left/right audio out from the Unit
to the left/right audio inputs on your TV using the supplied A/V cable.
• S-video and Component Video jacks (Y, P B , P R ) is only for DVD.
To wall
outlet
Audio/Video cable
(supplied)
(red) (yellow ) (w hite)
(red)
(yellow)
(w hite)
Audio cable (not supplied)
(red)
(w hite)
Video cable (not supplied)
(yellow)
To wall outlet
Audio cable
(not supplied)
Coaxial digital audio cable
(not supplied)
(red) (white)
(red)
(w hite)
Audio equipment with digital
audio input jack
Amplifier of
stereo system, etc.
(not included)
DIGITAL
CONNECTION
ANALOGUE
CONNECTION