Code CR1200 McKesson HIS Quick Start - Manual (Page 5)

C005947_02_McKesson_BMA_QuickStartGuide 3
This use case enables a clinician to carry the CR2500 from room to room and wirelessly connect to the appropriate PC
by scanning the QuickConnect Code printed on the CodeXML® Bluetooth® Modem. The CodeXML® Bluetooth® Modem
interfaces to the PC using the USB keyboard. In this use case, the readers and extra batteries are charged at a central
location.
Wireless readers are rugged, lightweight, and are easily carried by the clinician. Code’s two-bay charger provides the
convenience and economy because the reader need not be removed from service for battery charging. Batteries can be
charged offline and are quickly changed without any tools.
2.2 Use Case #2 - Bar Code Reader Dedicated to a Clinician
Scan the following code to set up a wireless CR2500 dedicated to a clinician:
2.2.1 Use Case #2 - Reader Configuration Code
2.2.2 Use Case #2 - Modem Configuration Code
CR2500 Palm Format CR2500 with Handle
Use Case #2 - CR2500 dedicated to a clinician, wirelessly
connects to a computer located in a patient room as needed. To
configure a cabled CR2500, see 2.4 Use Case #4 - Cabled CR2500
or CR1200.
CR2500
Elastomer Boot
Scan the QuickConnect code on the CodeXML® Bluetooth® Modem and wait for a single beep, this will indicate that a wireless
connection to the modem has occurred.
Then, scan the M742_01 programming code.