Comtech EF Data CDD-880 - Manual (Page 98)

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–38
Modem
• Unit Name – The name assigned to this unit in the network (e.g., CDD‐880) is identified
here.
• System Contact / System Location – E‐mail and telephone contact information for Comtech
EF Data Customer Support are provided here.
Enter the desired settings. Click [Submit] to save.
• Set Time (hh:mm:ss) – Use the HH:MM:SS time format to set the time, where HH=hour [00‐
23]; MM=minutes [00‐59]; and SS=seconds [00‐59]).
• Set Date (dd/mm/yy) – Use the DD/MM/YY European time format to set the date, where
DD=day [01‐31]; MM=month [01‐12]; and YY=year [00‐99].
Set the time and date, and then click [Submit] to save.
• Adjustment for Internal 10 MHz Reference – Enter a value from ‐999 to +999 to set the
adjustment for the Internal 10 MHz High Stability Reference. Click [Submit] to save.
Save/Load Configuration
This section allows the user to save, and then load (recall) up to 10 configuration sets:
• To save a configuration set:
o
First, adjust all operational configuration parameters to suit.
o Then, use the top (Save) Select Location dropdown to select 1 through 10.
o Finally, click [Save Configuration] to store the configuration set.
• To load (recall) a configuration set:
o
First, use the bottom (Load) Select Location dropdown to select 1 through 10.
o Then, click [Load Configuration] to recall the selected configuration set.
Redundancy (FUTURE)
This section is reserved for future use. It will be operable only when an optional
Comtech EF Data Redundancy Switch is installed, and the CDD‐880 is recognized as
part of a 1:1 or 1:N redundant pair.
• Current Redundancy State – Use the drop‐down menu to select the unit as Offline or
Online.