Comtech EF Data CDD-562L - Manual (Page 108)

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–4
Telnet Logout Option – When operating the demodulator through a Telnet-based CLI session,
an additional means of ending a session is available on all menu pages – the Telnet Logout
option, executed by typing ‘L’:
By typing this letter, the user logs out of the Telnet session and returns control of the CLI to the
serial interface.
The IP Module does not allow concurrent access to the menu via Telnet and
the Console port. If a user connects via Telnet, the demodulator automatically
disables the console port for the duration of the Telnet session. All menu
pages allow a Telnet logout to end a Telnet session. Also, the demodulator will
automatically end a Telnet session after a configured period of inactivity
(configurable from 1 to 60 minutes).